Strain energy density of a circular cavity buried in semi-infinite functionally graded materials subjected to shear waves

In this paper, based on the theory of multiple scattering of elastic waves, employing wave functions expansion method, multiple scattering and strain energy density in semi-infinite functional graded materials with a circular cavity are investigated, the analytical solution of the problem is derived, and the numerical solution of the strain energy density factors around the cavity is also presented. The effects of the distance between the cavity and the edge of the materials, the wave number and the non-homogeneous parameter of materials on strain energy density factors are analyzed. From analysis, it can be seen that when the non-homogeneous parameter of materials is less than zero, it has less influence on the maximum strain energy density factor around the cavity; however, it has greater influence on the distribution of strain energy density factors around the cavity. When the non-homogeneous parameter of materials is greater than zero, it has greater influence on both the maximum strain energy density factor and the distribution of strain energy density factor around the cavity, especially in the case that the distance between the cavity and the edge is comparatively little.     

基于微机械陀螺的MIMU关键技术

针对基于微机械陀螺的MIMU关键技术，对其进行研究和解决。参加美国JDAM性能指标和导航精度要求，计算陀螺性能参数：采用多级大容量的滤波器及有源电流限制电路，同时电源的输入端接入EMC滤波器，以提高电磁兼容性，并能抵抗浪涌和拉偏的能力；DSP实现信号实时采集，采用高次多项式拟合预处理去除数据野值；根据GJB729评估方法，利用利用蒙特卡罗方法仿真进行精度评估；最后按照GJB813进行可靠性分析。     

热/机械载荷下功能梯度材料矩形厚板的弯曲行为

采用Reddy高阶剪切板理论，考虑材料物性参数随坐标和温度变化的特性，研究在均匀变化的温度场内功能梯度材料矩形板在面内与横向载荷共同作用下的横向弯曲问题，基于一维DQ法和Galerkin技术，给出了一对边固支，另对边任意约束时板弯曲问题的半解析解，以Si3N4/SUS304板为例考察了材料组份，温度场，面内载荷及边界约束条件等对功能梯度材料板弯曲行为的影响。     

Combination of Cobalt and Iron Polypyridine Complexes for Improving the Charge Separation and Collection in Ru(terpyridine)2‐Sensitised Solar Cells

Mixtures of polypyridine Fe^II and Co^II complexes are used as electron mediators in Ru–thienyltpy‐sensitised solar cells (tpy=terpyridine). The use of the metalorganic redox couples allows for improved charge‐collection efficiency with respect to the classical iodide/iodine couple which, when associated to Ru–tpy₂ dyes, usually produces poor performance. The improved charge collection is explained by a combination of effective dye regeneration and decreased recombination with the oxidised electrolyte on the basis of data obtained by transient spectroscopy and photoelectrochemical measurements. The efficiency of the regeneration cascade is also critically dependent upon the ability of the Co^II complex to intercept Fe^III centres, as clearly indicated by chronocoulometry experiments.     

Gas collection efficiency of annular denuders: A spreadsheet-based calculator

Denuders are widely used for atmospheric analysis. Annular denuders are especially well-suited for preconcentration of trace gases compared to simpler single tube designs. While traditionally coated annular denuders have both bounding surfaces that behave as sinks, annular denuders/membrane-based scrubbers with the same basic geometric design and with only one of the annular surfaces functioning as sink (e.g., a membrane tube whose outer surface behaves as a sink disposed within an inert jacket tube) have become common. However, the gas collection efficiency of such devices cannot be expressed as a simple equation with fixed constants and there is no presently available tool to a priori determine the denuder performance or to design denuders with specific removal efficiencies at specific sampling rates. This paper presents a simple to use “spreadsheet calculator” for concentric annular denuders of any dimension based on known solutions to analogous heat transfer problems. The results from the present spreadsheet calculator are compared with results from a commercial computational fluid dynamics package (Fluent™; this takes significant expertise and development effort to run)—the two approaches produce essentially the same results. The present spreadsheet calculator can be used easily and simply without training and will be a useful tool for denuder users and designers.     

A novel class of graded cylinders neutral to host shafts of arbitrary cross-sections under torsion

A novel class of graded cylinders is proposed as neutral inclusions inside host shafts of arbitrary cross-section under Saint-Venant's torsion. The graded cylinder is made of cylindrically orthotropic materials with position varying quantities. The profiles of the two distinct shear moduli in the radial and tangential directions follow specific forms based on an arbitrarily selected function along the radial distance. We show that this type of graded cylinders can serve as universal neutral inclusions within host shafts of arbitrary cross-sections. In addition, we find that the associated warping fields can be exactly determined in terms of simple exponents of the selected function. This suggests that, by tuning the gradation parameter, one can manipulate the warping field of the inserted cylinder without disturbing the fields inside the host shaft. This finding is an original contribution to the existing solvable configurations of composite shafts under torsion.     

Free vibration of functionally graded sandwich plates using four-variable refined plate theory

This paper uses the four-variable refined plate theory (RPT) for the free vibration analysis of functionally graded material (FGM) sandwich rectangular plates.Unlike other theories, there are only four unknown functions involved, as compared to five in other shear deformation theories. The theory presented is variationally consistent and strongly similar to the classical plate theory in many aspects. It does not require the shear correction factor, and gives rise to the transverse shear stress variation so that the transverse shear stresses vary parabolically across the thickness to satisfy free surface conditions for the shear stress. Two common types of FGM sandwich plates are considered, namely, the sandwich with the FGM facesheet and the homogeneous core and the sandwich with the homogeneous facesheet and the FGM core. The equation of motion for the FGM sandwich plates is obtained based on Hamilton's principle. The closed form solutions are obtained by using the Navier technique. The fundamental frequencies are found by solving the eigenvalue problems. The validity of the theory is shown by comparing the present results with those of the classical, the first-order, and the other higher-ordex theories. The proposed theory is accurate and simple in solving the free vibration behavior of the FGM sandwich plates.     

Real‐Time Measurement of the Size Distribution of Diesel Exhaust Particles using a Portable 4‐stage Electrical Low Pressure Impactor

For this study, a 4 stage electrical low pressure impactor was designed to measure the real‐time size distribution of diesel particulate matter (DPM). For the performance evaluation, sodium chloride (NaCl) particles and dioctyl sebacate (DOS) particles were used. After evaluating the collection efficiency of each stage of the impactor, the size distributions of test particles were estimated using electrical current data and their inversion algorithm, and this was found to agree with the results obtained by a scanning mobility particle sizer (SMPS). For measurement of DPM, a common‐rail direct injection (CRDI) diesel engine, for engine speeds of 1,200 rpm and 1,500 rpm at 2.7 kgf·m, was used. Therefore, it was found that the size distribution of the DPM could be easily obtained, with the currents measured by the impactor and the data inversion algorithm, in less than 5 seconds. Furthermore, the effective density of the DPM could be obtained using the calculated results and the SMPS data.     

Exact solutions of functionally graded piezoelectric material sandwich cylinders by a modified Pagano method

The three-dimensional (3D) coupled analysis of simply-supported, functionally graded piezoelectric material (FGPM) circular hollow sandwich cylinders under electro-mechanical loads is presented. The material properties of each FGPM layer are regarded as heterogeneous through the thickness coordinate, and obey an exponent-law dependent on this. The Pagano method is modified to be feasible for the study of FGPM sandwich cylinders. The modifications are as follows: a displacement-based formulation is replaced by a mixed formulation; a set of the complex-valued solutions of the system equations is transferred to the corresponding set of real-valued solutions; a successive approximation method is adopted to approximately transform each FGPM layer into a multilayered piezoelectric one with an equal and small thickness for each layer in comparison with the mid-surface radius, and with the homogeneous material properties determined in an average thickness sense; and a transfer matrix method is developed, so that the general solutions of the system equations can be obtained layer-by-layer, which is significantly less time-consuming than the usual approach. A parametric study is undertaken of the influence of the aspect ratio, open- and closed-circuit surface conditions, and material-property gradient index on the assorted field variables induced in the FGPM sandwich cylinders.